Threaded Fasteners课件.pptVIP

Threaded Fasteners Introduction FASTENING TYPE FASTENING TYPE THREAD APPLICATION THREAD APPLICATION Thread Terminology Threaded Fastener DIMENSIONING EXTERNAL THREAD M 10 ×1.5 ×1.0 Fine thread Coarse thread xx Thread length Use local note to specify :- thread form, nominal size, pitch (if it is a fine thread) Use typical method to specify :- thread length. 3. Thread form 4. Nominal size 5. Pitch 1. Tap drill size 2. Drill depth 6. Thread depth 8.50 Drill, 20 Deep, M10 Tapped, 15 Deep DIMENSIONING THREADED HOLE Use local note to specify BOLT : Terminology Bolt is a threaded cylinder