unit11车床与车削.pptVIP

In thread cutting operations, the workpiece can either be held in the chuck or mounted between the two lathe centers for relatively long workpieces. The form of the tool used must exactly coincide with the profile of the thread to be cut, i.e., triangular tools must be used for triangular threads, and so on. 在螺纹切削作业中，工件既能支撑于卡盘中，对相对较长的工件也能安装在两个车床顶尖之间。使用的刀具外形必须正好与要切削螺纹的轮廓一致，即三角形刀具必须用于三角形螺纹等等。 Knurling. Knurling is mainly a forming operation in which no chips are produced. It involves pressing two hardened rolls with rough filelike surfaces against the rotating workpiece to cause plastic defor