水泥基灌浆材料塑性膨胀率测试方法的比较与分析.pdfVIP

学兔兔 全国中文核心期刊 斩癯建魄 中国科技核心期刊 水泥基灌浆材料塑性膨胀率 测试方法硇比较与分析 周紫晨，曾明 (中冶武汉冶金建筑研究院，湖北 武汉 430081) 摘要：介绍国际上常用的4种水泥基灌浆料塑性膨胀率的测试方法：ASTM C827非接触式测量法、PTGS量筒法、GB／T 5O448— 2008架百分表法及橡胶袋法，并对测试方法、测试结果及其相关性进行对比分析。结果表明，非接触式测量法和橡胶袋法能够准确、 全面地反映出浆体塑性阶段的体积变化；架百分表法无法反映出浆体入模后1 h内的体积变化；量筒法难以定量评定，且易受观察 者主观性的影响。非接触式测量法、架百分表法及橡胶袋法相关性很高，各因素间存在很好的相关性。 关键词：水泥基灌浆材料；塑性膨胀率；测试方法；非接触式测量法；量简法：架百分表法；橡胶袋法 中图分类号：TU57 8．1 文献标识码：A 文章编号：1001—702X(2011)09—0059—04 Comparison and analysis of test methods for plasticizing expanding ratio of cementitious grouting material ZHOU Zichen，ZENG Ming (Wuhan Metallurgical Construction Research Institute of MCC Group，Wuhan 430081，Hubei，China) Abstract：Four test methods were introduced for plasticizing expanding ratio of cementitious grouting materials，they were the ASTM C827 Non—contact test method，the PTGS Measuring Cylinder test method，the GB／T 50448--2008 Dial indicator test method and Rubber bag test method．Their test methods，testresults and correlation coefficients were compared．The experiment results show that the Non—contact test method and the Rubber bag test method were accurate and comprehensive；the Dial indicator test method couldnt reflect the volume change of grout at first one hour；the Measuring Cylinder test method was easily influenced by subjective factors．The Non-contact test method，the Dial indicator test method and the Rubber bag test method were very highly correlated． Key words：cementitious grouting material；plasticizing expanding ratio；test method；Non-contact test method：Measuring Cylin-