压弯荷载作用下复合节能轻质墙板的有限元分析.pdfVIP

学兔兔 第29卷 第4期 建筑科学与工程学报 Vo1．29 NO．4 2012年 12月 Journal 0f Architecture and Civil Engineering Dec．2012 文章编号：1673—2049(2012)04 0089—07 压弯荷载作用下复合节能轻质墙板的有限元分析 曲 日 平周 ，过轶青 。 (1．河海大学 土木与交通学院，江苏 南京 210098；2．南京工程学院 建筑工程学院，江苏 南京 211167) 摘要：为研究压弯荷载作用下复合节能轻质墙板横向水平受力性能，以墙板压弯试验为基础，建立 了压弯墙板有限元模型。通过与墙板试验结果进行比较，验证了有限元模型的正确性，并利用该有 限元模型，探讨了自攻螺钉间距、自攻螺钉直径、薄面板强度、薄面板弹性模量等参数对压弯墙板横 向水平承载力的影响程度与规律。以此为基础，提出了压弯荷载作用下复合节能轻质墙板横向水 平承载力简化计算公式。结果表明：自攻螺钉间距、自攻螺钉直径与薄面板强度、薄面板弹性模量 等参数对压弯墙板横向水平承载力有较大影响。 关键词：复合节能轻质墙板；压弯荷载；有限元模型；弹性模量；承栽力 中图分类号：TU323．3 文献标志码：A Finite Element Analysis of Light Weight Energy—saving Composite Wall Under Vertical and Lateral Loads CAO Ping—zhou ．GUO Yi—qing ’ (1．School of Civil and Transp0rtation Engineering，Hohai University，Nanjing 210098，Jiangsu，China； 2．School of Civil Engineering，Nanjing Institute of Technology，Nanjing 211167，Jiangsu，China) Abstract：In order to study the mechanical behavior of light weight energy—saving composite wall under vertical and lateral loads。the finite element models of composite wall were established based on the composite wall specimen test．The finite element models were verified rationally and correctly in the paper，through comparing with the composite wall test results．The finite element model was used to analyze the load bearing capacity of composite wal1．Various factors affecting degree and rules of performance of composite wall with simply supported end were analyzed，such as the span of self-tapping screw，the diameter of self-tapping screw，the strength of thin pane1 and