超高强铝合金的显微组织.pdfVIP

  • 87
  • 0
  • 约1.98万字
  • 约 6页
  • 2017-05-23 发布于河南
  • 举报
超高强铝合金的显微组织

        LAFT 轻  合  金  加  工  技  术 2006 , Vol . 34 , №2 48 超高强铝合金的显微组织 田福泉 ,崔建忠 ( 东北大学 EPM 重点实验室 ,辽宁沈阳 110006) 摘要 :全面地介绍和评述国内外关于 AlZnMgCu 系铝合金显微组织的研究状况 。AlZnMgCu 合金的显微组织主要 ( ) ( ) ( ) ( ) 由基体析出相 MPt 、晶间析出相 GBP 、晶界无析出带 PFZ 和抑制再结晶化合物 过渡族元素化合物 组成 ,它们几 乎影响着合金的所有宏观性能 。因此 ,控制了显微组织中的基体析出相 、晶间析出相 、晶界无析出带和抑制再结晶 化合物的大小 、分布及均匀性就控制了性能 ,而实现控制的主要途径是热处理 。 关键词 :铝合金 ;超高强 ;显微组织 ;热处理 ( ) 中图分类号 :TG146 . 2   文献标识码 :A   文章编号 :1007 - 7235 2006 02 - 0048 - 06 Microstructures of ultra high strength aluminum alloys TIAN Fuquan , CUI Jianzhong ( The Key Laboratory of Electromagnetic Processing of Materials , Ministry of Education , Northeastern University , Shenyang 110006 , China) Abstract : The study things ,in home and abroad ,about the microstructures of the series AlZnMgCu aluminum alloys have been comprehensively introduced and reviewed. The study has shown that :the microstructures of the AlZnMgCu aluminum alloys consist ( mainly of the MPt , GBP ,PEZ and the compounds which hinder recrystallization the compounds are ones of the elements of the tran sit group s) ,of which the first three items compose the most important three characteristics describing the unevenness of the mi crostructures ,the latter also appears both the unevenness in distribution and the unevenness influencing the distribution of the dislo cations. They have all effects on nearly all the mac

文档评论(0)

1亿VIP精品文档

相关文档