波形钢腹板PC组合箱梁抗扭性能试验与有限元分析.pdfVIP

学兔兔 第28卷 第4期 建筑科学与工程学报 Vo1．28 NO．4 2011年 12月 J ournal of Architecture and Civil Engineering Dec．2O11 文章编号：1673—2049(2011)04—0106—10 波形钢腹板PC组合箱梁抗扭性能 试验与有限元分析 陈 宜言 ， 陈宝春 ，林 松 (1．深圳市市政设计研究院有限公司，广东 深圳 518029；2．福州大学 土木工程学院，福建 福州 350108) 摘要：进行了波形钢腹板PC组合箱梁约束扭转试验，并利用ABAQUS软件进行有限元模拟，对影 响抗扭刚度的相关参数进行了分析。结果表明：高跨比较大时，横隔板对抗扭刚度的影响较大；波 形钢腹板的倾斜角较小时，波形钢腹板的倾斜设置对抗扭刚度的影响较小；当波形钢腹板倾斜角的 正切值大于 1／5时，抗扭刚度的提高幅度大于10 。 关键词：波形钢腹板；PC组合箱梁；抗扭刚度；倾斜角；有限元分析 中图分类号：TU338 文献标志码：A Experiment of Torsional Performance and Finite Element Analysis of PC Composite Box Girder with Corrugated Steel Webs CHEN Yi—yan ，CHEN Bao—chun。，LIN Song (1．Shenzhen Municipal Design Research Institute Co．，Ltd．，Shenzhen 518029，Guangdong，China； 2．School of Civil Engineering，Fuzhou University，Fuzhou 350108，Fujian，China) Abstract：The constrained torsional experiment of a PC composite box girder with corrugated steel webs was carried out and some related parameters of influencing torsional rigidity were analyzed by using finite element method with software ABAQUS．Results show that when the depth—span ratio is large，the cross wall has more influence to the torsional rigidity；when the inclination angle of corrugated steel webs is small，inclined set of corrugated steel webs has a little influence to the torsional rigidity，but when the tangent value of inclination angle of corrugated steel webs is more than 1／5，the torsional rigidity can improve more than 1 0 ． Key words：corrugated steel web；PC composite box girder；torsional rigidty；inclination angle； finite element analysis