冷轧带钢卷退火工艺(国外英文资料).docVIP

冷轧带钢卷退火工艺Xiangfengtai machinery equipment co., LTD., Professional production division, leveling machine, leveling machine, pickling machine, polishing machine, 8K mirror steel machine and other metal processing machineryCold rolled strip annealing technologyFrom: Cold rolled strip steel is annealed in protective gas, does not oxidize, does not produce decarburization, is called bright annealingSystem of cold rolling steel strip coil annealing process, mainly according to the annealing steel grade, chemical composition, the strip size, volume weight and other factors, such as product quality technical requirements set, of course, and use of type annealing furnace and equipment technical level has a direct relationship, cold rolled steel strip coil annealing system also need to gradually, based on years of production practice and various kinds of test revision, constantly improve.A heating velocityHeating rate of mainly depends on the coefficient of thermal conductivity of steel, the carbon content in the chemical composition of steel and alloy element content for greater influence on the coefficient of thermal conductivity, if the high carbon content, high alloy content, small thermal conductivity, heat speed is slow, in order to avoid the microstructure and mechanical properties of internal and external temperature difference is too large to cause uneven, from room temperature to 400 degrees Celsius, heating speed is normally does not control, single pile type tight roll of bell type furnace is a batch annealing, while heating cover is continuous operation, when a furnace heating cover after the heat preservation, heat shield driving license immediately to another has been prepared on the mantelpiece to continue production, conform to the normal tissue production rule, namely so dont waste energy, heating cover to production under thermal state in furnace steel coil is quickly rose from room temperature to 400 degrees Celsius, steel coil and recrystallization happen