Q420双角钢组合截面偏压构件弹塑性弯曲屈曲.pdfVIP

学兔兔 第34卷第5期 土 木 建 筑 与 环境 工程 J ournal of Civil．ArchitecturalEnvironmental Engineering Vol_34 NO．5 2012年 10月 0ct．2Ol2 doi：10．3969／j．issn．1674—4764．2012．05．003 Q420双角钢组合截面偏压构件弹塑性弯曲屈曲 俞登科 ，李正良 ，杨隆宇 ，余 周 (重庆大学 a．土木工程学院；b．山地城镇建设与新技术教育部重点实验室 重庆，400045) 摘 要：通过试验研究了特高压输电塔塔身主材规格为L16O×12、L16O×14、L16O×l6的3种 Q42O高强双角钢十字组合截面偏压构件的破坏模式，试验结果表明此种构件均以整体弹塑性弯曲 屈曲破坏为主。基于改进逆算单元长度法编制相应程序，计算得到了这3种角钢规格在不同长细 比并考虑残余应力情况下截面的弯矩一轴力相关曲线，提出适用于此类截面形式的弯矩作用平面内 稳定的建议计算公式及柱子曲线。引用的非线性幂函数模型能较好的反映此类偏压构件在等端弯 矩受力作用下杆件端部弯矩与杆端转角的弯矩 转角关系。 关键词：高强钢；组合截面；弹塑性；单元长度法；稳定 中图分类号：TU391 文献标志码：A 文章编号：1674—4764(2012)05—0012-05 Elastoplastic Bending Buckling of Q4 2 o Eccentric Compression Members with Double ’angle Combined Cross。。section YU Dengke。’。，LI Zhengliang。，。，YANG Longyu。，。，YU zhou。， (a．College of Civil Engineering；b．Key Laboratory of New Technology for Construction of Cities in Mountain Area of Ministry of Education，Chongqing University，Chongqing 400045，P．R．China) Abstract：The experiments were carried out to investigate the behavior and failure modes of Q42O double-angle combined cross-section members whose specification were L160×12，L160×14，L160×16．The results show that all the members fail with an elastoplastic bending buckling．Based on the improvement of the inverse calculation segment length method and some relevant procedures，the related curves of axial force and moment with different specifications，different slenderness ratios and residual stresses were calculated．The calculation method of in plane stability and column curves were proposed．The nonlinear power function model is appropriate for such members mo