TiC强化中锰钢的组织与性能研究.pdfVIP

学兔兔 造 Mar,2010 · 284· RY VoI．59 No．3 TiC强化中锰钢的组织与性能研究 姚思佳，孙扬善，薛 烽，倪自飞 (东南大学材料科学与工程学院，江苏省先进金属材料高技术研究重点实验室，江苏南京21l189) 摘要：中锰钢是一种新发展的耐磐钢，而TiC的加入可以显著提高钢的耐磨性能。通过原位合成的方法，在中锰钢中 引入TiC颗粒，探索了进一步提高该铜种耐磨性能的途径。研究表明，通过原位合成方法引)~TiC颗粒后，中锰钢基体 组织未发生明显变化，水韧处理后中锰钢呈奥氏体组织；TiC的引入提高了中锰钢的硬度和强度，表明其具有一定的强 化效果；对TiC强化中锰钢磨损试验研究表明，不论是在油润滑，还是水润滑条件下，引入一定量的TiC都会使基体耐 磨性大幅提高，所能承受的极限载荷也有很大提高。 关键词：中锰钢；TiC；磨损 中图分类号：TG142．1文献标识码：A 文章编号：1001—4977(2010)03—0284—05 Microstructure and Properties of TiC Strengthened Medium-Manganese Steel YAO Si-jia，SUN Yang—shan，XUE Feng，NI Zj—fej (SchooI of Materials Science and Engineering，Southeast University，Jiangsu Key Lab for Advanced Metallic Materials。Nanjing 21 1 1 89，Jiangsu，China) Abstract：Medium manganese steel iS a new kind of wear resistance stee1．TiC could rapidly increase the wear resistance of stee1．A new method．in situ synthesis method introducing TiC particles jnto medium manganese stee1．was explored to jncrease the wear resistance of this stee1． The results show that through the introduction of in situ synthesis TiC．medium manganese steeI has no significant changes in the structure．Medium manganese steeI has austenite structure．But the jntroduction of TiC jmproves hardness and strength of medium manganese steel。which shows．a certain effect：iveness of strengthening．The studies show that no matter in the oil-lubricated or water-lubricated condition．TiC could increase the wear resistance of matrix and improve the Ioad limit greatly． Key words：medium manganese steel；TiC；wear 磨损是一种常见的材料失效形式，据英、美、日