加热对EPS模温度场分布及膨胀力传递的影响.pdfVIP

维普资讯 学兔兔 铸 造 Jan．2008 - 40 · FOUNDRY Vo1．57 No．1 ‘ 、● ●^●u■， ● ■、● ■^ 、 {应用技术 ； ■、，■^ ’^■、 ●■‘ n●、 ■ ■ 一 加热对EPS模温度场分布及膨胀力传递的影响 米国发 ，浮红霞 ，王狂飞 ，刘翔宇 ，贾宝仟 (1，河南理工大学材料科学与工程学院，河南焦作454000；2．哈尔滨工业大学材料学院黑龙江哈尔滨150001) 摘要：针对EPS陶瓷壳型精铸失模时容易裂壳的现象，对EPs消失模精密铸造工艺进行研究后，建立了EPS模温度场分 布模型，考察了加热对EPS模温度分布的影响。利用流变学原理建立了失模时EPS模的粘弹性模型，分析了失模时EPS 模的粘弹性行为及力传递过程。利用单泡孔模型考察了EPS模中聚苯乙烯应力松弛现象对作用在型壳上膨胀力的影响， 并推导出膨胀力表达式。 关键词：EPS模精密铸造；失模；温度场；膨胀力 中图分类号：TG249．5 文献标识码：A 文章编号：100 1—4977(2008)0 1—0040—05 lnfluence of Heating On l emperature UistnbutiOn and ompresslon■ ～ 一。。 ‘ ‘ ●、0 0 0 0 0，、 0 Force Transferring of EPS Pattern MI Guo—fa’，FU Hong—xia’，WANG Kuang-fei’，LIU Xiang—yu’，JIA Bao—qian (1．School of Materials Science and Engineering，Henan Polytechnic University，Jiaozuo 454000， Henan，China；2．School of Materials Science and Engineering，Harbin Institute of Technology， Harbin 1 50001，Heilongjiang，China) Abstract：Aiming at the problem of the ceramic shelI cracking，the pattern removing technique of EPS pattern was presented．The modeI of temperature field in EPS pattern was proposed．by which the influence of heating on the temperature distribution was analyzed．The viscoelastic mode1 was created on the basis of rheologicaI theory．and the viscoelastic character of EPS pattern as welI as the transferring of compression force during the pattern removing process were discussed．The effect of stress relaxation of polysty rene on the com pression force acting on the shel1 was investigated