循环式四工位铁型覆砂造型机的研发.pdfVIP

学兔兔 May2014 铸 造 VOI．63 NO．5 FOUNDRY 一‘_、● ●^■u■ ●‘ 、■^{铸造设备{ ’ ●^，■^■～ ■■ ’r■^，’ _ 循环式四工位铁型覆砂造型机的研发 刘同帮，黄列群，潘东杰，沈永华，夏小江，洪华泽，费巍俊 f浙江省机电设计研究院有限公司，浙江杭州310002) 摘要：介绍了铁型覆砂造型工艺原理、流程及技术特点。分析了影响铁型覆砂造型效率的因素，拆分了工艺流程， 整合了工序顺序，优化了工位时间，最后提出了循环式多工位铁型覆砂造型工艺方案，研发了一种循环式四工位铁 型覆砂造型机，使造型效率提高至120型／l1，有效地解决了造型效率低等问题。 关键词：铁型覆砂；造型机；工位；效率 中图分类号：TG231．65；TG249．9 文献标识码：A 文章编号：1001—4977(2014)05—0457—04 Researching and Developing About Circulating Four—Station Sand—Lined Metal Mold Molding Machine LIU Tong—bang，HUANG Lie—qun，PAN Dong~ie，SHEN Yong—hua，XIA Xiao-jiang， HONG Hua—ze，FEI Wei-jun (Zh~iang Institute ofMechanicalElectrical Engineering Co．，Ltd．，Hangzhou 310002，Zh~iang，China) Abstract：The article introduces the principle，flow and characteristics about molding process of sand-lined metal mold casting．the factors that influence e伍ciency of sand．1ined metal mold casting was analyzed,the technological process was splited,the operation sequence was integrated,the station of time was optimized， finally,the solutions of the circulating transfer of sand．1ined metal mold casting was proposed．In order to jmprove the efficiency of the molding,the circulating four-station sand molding machine is researched and developed，which make the modeling efficiency up to 1 20／h，the low efficiency of the modeling was solved effectively． Key words：sand—lined metal mold；molding machine；station；efficiency 采用铁型覆砂铸造工艺生产铸件，具有铸件尺寸 覆砂造型的工艺特点人手，研发了一种循环式多工位 精度高，造型材料消耗量少，工艺出品率高，铸件性 造型机，有效地解决了现有造型机造型效率低等问题。 能佳等诸多优点，适用于高质量铸件的大批量生产『l-2]。 1 覆砂造型工艺流程及特点