土建英语作业(中英文对照翻译).doc

Foundations All structures designed to be supported by the earth, including buindings, bridges, earth fills, earth and rock and concrete dams,consist of two parts. These are the superstructure, or upper part, and the substructure element which interfaces the superstructure and supporting ground. In the case of earth fills and dams, there is often not a clear line of demarcation between the superstructure and substructure. The foundation can be defined as the substructure and that adjacent zone of soil and rock which will be affected by both the substructure element and its loads. The foundation engineer is that person who by reason of experience and training can be produce solutions for design problems involving this part of the engineered system. In this context,foundation engineering can be defined as the science and art of applying the principles of soil and structural mechanics together with engineering judgement to solve the interfacing problem.The foundation engineer is concerned directly with the structural members which affect the transfer of load from the superstructure to the soil such that the resulting soil stability and estimated deformations are tolerable.Since the design geometry and location of the substructure element often have an effect on how the soil responds,the foundation engineer must be reasonably versed in structural design. Foundations for structures such as buildings, from the smallest residential to the tallest high-rise, and bridges are for the purpose of transmitting the superstructure load. These loads come from column-type members with stress intensities rangeing from perhaps 140MPa for steel to 10MPa for concrete to the supporting capacity of the soil, which is seldom over 500kPa but more often on the order of 200 to 250kPa. Almost any reasonable structure can be built and safely supported if there is unlimited financing.Unfortunately, in the real situation this is seldom, if ever, the case, and the foundati