传感器双语实验报告1.docVIP

QR7611—A 编号：SYB-2016-2 Report?No.：SYB-2016-2 鼓式气制动轮速传感器 Drum brake wheel speed sensors 试 验 报 告 Test report 编制（Prepared by） 审核（Audited by） 批准 (Approved by) XXXXXXXXX有限公司实验室 Chengdu changdi Sensing technology limited companylaboratory 二〇一六年二月三日 February the?third,two thousand?and?sixteen 检 验 报 告Test report 生产单位 Production unit XXXXXXX有限公司 XXXXXXXXXSensing technology limited company 规格图号 Product?model XXXXXXX 产品名称Product name 鼓式气制动轮速传感器Drum brake wheel speed sensors 生产日期 Production date 2016.01.15 样品数量 Sample quantity 15件15pieces 送样日期 Date landed 2016.01.18 试验日期Testing period 2016.1.19～2016.2.1 送样者 Deliverer 管爱Aihua Guan 试验项目 Test itemes 1、基本性能Basic performance 2、湿热试验Cyclic damp heat test 3、盐雾试验Salt spray test 4、高低温冲击试验Light and low temperature impact test 5、耐汽油试验Gasoline resistant test 6、高温试验High-temperature test 7、低温试验 Low-temperature test 8、振动试验 Vibration test 9、绝缘耐压试验Dielectric strength test 10、防水试验Water proof test 试验依据 Test standard Q/CD·J37-2011 CDS006C轮速传感器技术条CDS006Wheel speed sensor technical condition GB/T2423.4-2008 电工电子产品基本环境试验规程 试验Db:交变湿热试验方法 Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat，cyclicEnvironmental testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal) GB/T2423.17-2008 电工电子产品基本环境试验规程 试验Ka: 盐雾试验方法Test method Basic environmental testing procedures for electric and electronic products--Test Ka:Salt mist GB/T2423.22-2012 电工电子产品基本环境试验规程 试验N: 温度变化试验方法 Environmental testing - Part 2: Tests methods - Test N: Change of temperature 试验结论Judgemen 依据产品图样及上述标准分组对样品进行各项试验，产品性能均满足要求（具体试验数据见单项试验报告），故判该产品性能合格。 According to product design drawings and standard mentioned above to have each test, product performance requirements should meet requirements (see each tes