5测试计画之设计与设定说明.doc

Revision History Revision Date Author Comments 0.01 6/01/2004 Ben Huang First release Table of contents Revision History 2 Abstract 4 1 Introduction 5 1.1 Overview 5 1.2 Environment requirement 5 2 Installation 6 3 測試環境設定 9 3.1 系統配置(範例:CMU200測試環境) 9 3.2 系統配置(範例:Agilent 8960測試環境) 10 4 程式操作流程之說明 11 4.1 主畫面之設定與介紹 11 4.2 RF Final Test參數設定介面之說明 12 4.3 Calibration 參數設定介面之說明 14 4.4 Report option and System configuration設定介面之說明 15 4.5 執行測試與測試結果說明 19 4.5.1 RF Final Test執行步驟 19 4.5.2 Calibration Test執行步驟 20 4.5.3 整合Calibration and Final Test執行步驟 20 4.5.4 產生Test Report 測試完成後的狀態表示 21 5 測試計畫之設計與設定說明 22 5.1 Calibration 的設定及測試上之說明 22 5.2 RF Final Test 的設定及測試上之說明 22 5.2.1 RS CMU200的設定及說明 22 5.3 整合Calibration與RF Final Test的測試設計與設定之說明 26 Figures Index 27 Abstract 這個程式主要的用途是屬於使用在生產線的測試軟體，，，， ，，，Introduction Overview MTK ate (Media Tek automatic test environment)這個程式的使用介面是屬於便於生產線操作員利用的測試軟體，，，，MTK_ATEDEMO_SETUP.ini) ，Signaling(META mode)的測試模式下做Calibration ，Environment requirement OS: MS Windows 2000 or XP Hardware: Generic Pentium III or above PC Agilent 8960 or RS CMU 200 The following hardware is needed for MTK atedemo NI (National Instruments) GPIB driver The driver is bundled with NI GPIB device. Agilent 661x or Agilent 663x2 series power supply RS NGSM Power Supply Installation Please execute “setup.exe” to start installing Program. The install shield will help user to install step by step. Please click [next ] button. Please select a directory to install and then click [next ] button. The ATE Program will be installed at C:\Program Files\MTK_atedemo\. The install shield will help user to install step by step, and please add the report folder into C:\Program Files\MTK_atedemo\report ,Copy the chipset database file like BPLGUInfoCustom file name into here, The test report will put into here and if you do the calibration test , program will get database default here, If you don’t install this path , the program will fail. Please confirm Uninstall and then click [Ne