阳泉市某单层轻钢厂房设计大学学位论文.docVIP

摘 要 我们十分看好钢结构的发展前景，奥运场馆的建设、西部大开发的实施、城市化和工业化步伐的进一步加快、重大基础设施工程的上马等等，均为中国钢结构发展提供了十分广阔的前景。中国钢结构如今无论是设计水平，还是制作安装技术，都不比国外逊色，完全可以满足我国经济发展和基本建设的需要。 本工程为阳泉市某单层轻钢厂房，总建筑面积2160平方米，建筑高度8.9米。采用门式刚架结构，结构形式为单跨双坡，内设一台10T中级工作制吊车（A5），室内外高差0.45m. 本工程耐火等级为二级，屋面防水等级三级，建筑耐久年限二级,抗震设防烈度7度。 本设计包括两部分，结构设计和基础设计。其中，结构设计包括梁柱截面设计，构件节点设计，吊车梁和牛腿设计，檩条设计，支撑设计，地脚锚栓设计等。厂房所用主要材料为Q235B。 本设计严格遵守国家现行相关规范。 关键词：单层 钢结构 工业厂房 Abstract We are very optimistic about the prospects for the development of steel structure, the construction of Olympic venues, the implementation of large-scale western development, urbanization and further accelerate the pace of industrialization, major infrastructure projects launched, and so on, are the development of Chinas steel structure provides a very broad Prospects. Now both the Chinese steel structure design, installation or production technology, not less than abroad, fully satisfy Chinas economic development and infrastructure needs. This project is the Yangquan some Some Monolayer Steel Structure Industry Workshop.The total floor space is 2160.The construction is highly 8.9m.Uses the gate type rigid structure,the structure style for strides one boats at one time two slopes, Uses one 10T intermediate working system crane(A5).Room inside and outside elevation difference 0.45m. This project fireproof is two levels.The earthquake resistance fortification intensity is 7 degrees.The roofing waterproofing rank is three levels.The building durable age limit is two levels. This design including two parts:structural design and ground foundation design. Among them, structural design including beam column section design ,component node design, crane beam and corbel design ,purlin design, foot fang bolt design and so on. The workshop uses the main material is Q235B. This design observes the national present standard strictly. Key word: steeltructure industry workshop monolayer 目录 第一章. 基本资料 1 第二章．截面验算 24 第一节 基本资料 24 第二节．边柱的验算： 24 第三节．斜梁的验算： 28 第三章．节点设计： 30 第一节．梁柱节点设计： 30 第二节．梁梁