SSD固态硬盘延长寿命优化方法(国外英文资料).docVIP

SSD固态硬盘延长寿命优化方法(国外英文资料) SSD solid-state drives extend life optimization A, open the AHCI The first step in the optimization of SSD first is to ensure that your disk read/write mode for AHCI, if your computer is Windows 7 system, generally only need to enter the BIOS Settings before installation system disk read/write mode to AHCI can, if you have installed Windows 7, and are not sure whether the disk work AHCI mode, so please see the following tutorial: Click win + R to enter the running dialog box. Enter Regedit into the registry. Select the path HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesmsahci. Double-click Start on the right side to change the key value to 0 and restart it. Update your chipset driver Keep the latest chipsets drive to improve system compatibility and improving disk, speaking, reading and writing, especially now the SSD update speed is faster, at any time is necessary to update the disk chipset. Trim is a very important feature that improves the ability to read and write on SSDS, reducing latency. This is an important technology supported by Windows 7, which needs to be supported by upgrades. With these two drivers, you can turn on the TRIM mode, and many test software can see that when the data is deleted, the disk will do the TRIM in the background. 3, shutdown system restore This is a very important step, and a lot of recent feedback indicates that the system restore will affect the normal operations of SSDS or TRIM, which will affect the ability to read and write on SSDS. Right click on my computer to select properties.2, select system protection.3, set the item.4, turn off the system restore. Four, open the TRIM Confirm that the TRIM open has always been a difficult thing, because we must be very closely monitor the status of the computer to judge, but often disk TRIM is instantly, so it is difficult to detect. We can see if TRIM is successful in the following way: 1. Open the CMD Right-click on CMD to run with administrator mode Enter