世纪网通网关配置命令简易方法2008(国外英文资料).docVIP

世纪网通网关配置命令简易方法2008(国外英文资料) The basic configuration criteria for the standard configuration of the netcom gateway (CNG300 H323) in the netcom gateway in the century 06-03 10:50 is the standard configuration standard: 1 initialization gateway Basic configuration criteria: 1 initialization gateway Login the voice gateway Login: root Password: centnet Centnet config Please input the password Centnet/conf Step 1: configure the network address Centnet/conf e0 (entering the network configuration port) Centnet/conf/e0 no DHCP (delete the automatic access to network address functionality) Centnet/conf/e0 IP (configure the network IP address) Centnet/conf/e0 pppoe user yxgu (configure ADSL information) Centnet/conf/e0 proxy dyn Centnet/conf/e0 qu (exit network configuration port) Centnet/conf/sh e0 (view network configuration) Step 2: configure the dial rule Centnet/conf dial 0t (entering the rule configuration port) Centnet/conf/dial 0T qu (T stands for any number) Centnet/conf / dial t Centnet/conf/Dial T prefix + 010 (010 represents the area number, which is indicated here to Dial this area number) Centnet/conf/Dial T qu Step 3: configure the routing address Centnet/conf route del def (delete the default gateway address) Centnet/conf route add def (add the gateway address) Centnet/conf sh route (view routing) Step 4: configure the main name number Centnet/conf sup Both please input the password: szcentnet Centnet/conf line (enter the call number configuration mode) Centnet/conf/LineALL num 01088888888 (set up the main name) Centnet/conf/LineALL prefix + 010 (remove from the market before adding 010) Centnet/conf/LineALL quit Step 5: configure the web Centnet/conf h323 Centnet/conf/H323 sh (look at the directory) Centnet/conf/H323 gk 16 Centnet/conf/H323 h323id. Co.test (configure the gateway ID) Centnet/conf/H323 qu (exit) Centnet/conf wr (save) Step 6: change the volume A: the volume modulation If the volume is small, it increases in lineALL