中国地质大学土木工程专业2014年春季功课--桩基工程及其检测技巧(专升本)阶段性功课3谜底(国外英文资料).doc

中国地质大学土木工程专业2014年秋季作业--桩基工程及其检测技术(专升本)阶段性作业3答案(国外英文资料) The pile foundation engineering and its testing technique (special promotion) are the three answers Single topic selection Description: 1. Because the building foundation uneven, load difference is very big, complex shape of foundation deformation caused by the factors such as, for masonry bearing structure should be controlled by.... (5 points) (A) settlement (B) settlement difference (C) inclined (D) partial tilt Reference answer: D The hard soil layer should be chosen as the driving layer. The whole section of the pile is entered into the depth of the force layer, and it should not be less than 2d for the viscous earth and the silvery earth. Sand earth should not be less than 1.5d; Crushed rock, not less than 1d. When there is a weakness lying layer, the distance between the pile end to the soft lower layer should not be less than... and the deforming of the lower layer should be carried out. (5 points) (A) 1 d (B) 2 d (C) 3 d (D) 4 D Reference answer: D The seismic design of the pile is not included in the way of earthquake damage. (5 points) (A) earthquake liquefaction (B) (C) resonance destruction (D) in wave failure Reference answer: B 4. Pile-soil composite foundation is usually referred to by the two stiffness modulus (or) of different materials (different stiffness of pile and soil between piles reinforcement) composition, share the top load and coordinate deformation of artificial foundation. The common composite foundation does not contain... (5 points) (A) stud (B) deep mixing piles (C) just pile (D) pile Reference answer: C The design of the soil composite foundation, which requires the design of composite foundation method not including.... (5 points) (A) the load test method (B) test algorithm (C) the stress ratio estimation method (D) area ratio estimation Reference answer: B Multiple choice Description: The basic design of the foundation requires that important buildings must meet, deformation