南水北调中线工程地理信息数据采集(国外英文资料).docVIP

南水北调中线工程地理信息数据采集(国外英文资料) Use the full digital photogrammetry system to produce 1:20 scale DLG products. Using stereoscopic images to collect data, the principles of operation are as follows: (1) according to the principle of the external industry and the positioning of the inner industry, the reference is to carefully and carefully identify and map all kinds of ground and geomorphological elements in the three-dimensional model. (2) the surveying and mapping of the ground objects and the elements of geomorphology shall be cut and drawn, without distortion or shift. The ground objects, which are denoted by the scale of the scale of the earth, shall not be cut to the site or position line. (3) the priority shall be the independent land, industrial and mining buildings and public facilities which have bearing and economic significance. (4) the elements of water system are the main points of surveying and mapping of the topographic map. The river water line is collected by the two lines, and the water level of the pothole, reservoir, lake and other parts of the water are mapped by the water level, water well, spring, etc. The main lines of the Central Line need to be highlighted, according to the three-dimensional surveying and mapping of the construction of the project. DEM data production Digital elevation model (DEM is engineering design and construction, the computation, storage capacity calculation of quantities, the three-dimensional geographic information environment construction of basic information, DEM is of great significance to the construction of quality and precision. Using the full digital photogrammetric system, the DEM data of the typical channel segment of the middle line project is produced. (1) basic requirements -- the DEM network is small: 1m by 1m; -- DEM high accuracy: the error is not greater than 2/3 of the height of the grid. -dem edge accuracy: the adjacent DEM side will not be budged, the adjacent row (column) grid point plane coordinates s