正负极性直流高压发生器(国外英文资料).docVIP

正负极性直流高压发生器(国外英文资料) Yangzhou pengxiang electric power Safety warning The people who use the dc voltage tester must be in a high-voltage test The professional personnel use this instrument to ask the user to press the electric safety regulation 168 rule, and then add two obvious disconnection points before the working power enters the tester. When changing the test and the connection, the two power supply should be disconnected clearly. Please check the tester control box before testing. The ground line of the test circuit shall be ground to the point shown in this manual (figure 4). The sample (s) for large capacitance discharge should be through 100 Ω/V discharge resistor rod sample (s) of discharge. When discharging, the bar should not be immediately in contact with the test article, should first put the electric bar gradually close to the test, to a certain distance air space to start free discharge, there is hissing sound. When no sound can be used, electric bar discharge can be used. One, product introduction PY series positive and negative polarity high frequency dc high voltage generator is developed by my unit based on the users needs. Applicable to the electric power department, factories and power departments, scientific research units, railway, chemical industry, power plant, etc for zinc oxide lightning arrester, magnetic blow arrester, power cable, generator, transformer, switch the replacement of the dc high voltage test equipment. Dc high voltage generator adopts high frequency doubler circuit, apply the latest high frequency PWM pulse width modulation technology, the closed-loop adjustment, the voltage feedback, the voltage stability increased significantly. Using the high power IGBT device and its driving technology, according to the theory of electromagnetic compatibility, special shielding, isolation and grounding are adopted. Make dc high voltage generator to achieve high quality, portable, and can withstand the rated voltage discharge without d