纸塑缓冲结构改良设计(国外英文资料).docVIP

纸塑缓冲结构改良设计(国外英文资料) Improved design of paper plastic cushion structure Abstract: the lining of the cushioning package is usually EPS (fable polystyrene foam), and the white pollution caused by EPS waste is also alarming. After entering the environment, it is difficult to degrade, EPS use of fluorine hydrogen chloride foaming agent have damage to the ozone layer, has banned the use of in the world, as well as brought barriers to exports of electronic products. As a result, a new, biodegradable buffer package is urgently needed. The pulp molding products are rich in raw materials, non-toxic, tasteless and capable of aseismic performance, which is only suitable for lining materials such as mobile phones. It has a special cushioning mechanism as an environmental buffer. It is very important to design the buffer structure of the material in order to produce a good cushion. Therefore, this article through the analysis of paper-plastic buffer mechanism and the summary of the buffer structure design elements, the structure is optimized design, provides the basic theory basis. Keywords: environmental protection, paper pulp, cushion structure, design 1, the paper plastic buffer principle Paper-plastic products is to use the waste paper recycled pulp as raw material, through mashing and special additives, in drawing up a collection of private network mode shape on a certain shape molding material. When paper-plastic products in transport packaging As cushion packaging step, the buffer mechanism and foam plastic is different, it is the use of its own special structure after loading, the deformation of the energy from the outside world, thus reducing the packaging in the process of transportation by shock and vibration, general paper-plastic buffer material is suitable for the small static resilience. And the traditional bubble cushion material is the deformation of the material itself to absorb the external energy and achieve the cushioning effect. Since the paper plastic produ