HDPE管材的连接方法(国外英文资料).docVIP

HDPE管材的连接方式(国外英文资料) HDPE pipe connection mode With the increasing market demand, currently on the market for HDPE as the main raw material of the pipe structure and species is becoming more and more manufacturers according to the regional geological conditions of demand and production pipeline interface structure is different, so the pipeline connection between there are a variety of connection mode, currently on the market the main connection way has the following categories: One: hot melt connection (that is, the material of the same material is fused after high temperature.) Heat fusion connection: by heating the two pipes by heating the plate, the connecting method of welding to one body is welded Advantages: simple operation, high strength, stable connection quality and fast construction. (2) heat shrinkable belt (set) connection: double connection, heat shrinkable belt (set) is made from polyolefin and enhance fiber after crosslinking, the inner layer using heat shrinkable belt as sealing layer, outer layer as a strengthening layer, guarantee the sealing of the joint and intensity. Advantages: strong resistance to aging, good sealing and strong tensile strength, suitable for geological environment. Two: electrical fusion connection Electric hot melt connection: (1) socket type some direct socket) plus seal without material and temperature change in the pipe before delivery prepared bell mouth and socket, on the inner wall of the socket of embedded resistance wire, connection using a dedicated electric welding machine to the resistance wire electricity, resistance wire heating molten, make connection in the resin melt inflation pressure connection resistance wire resin, on either side of the interface connection after cooling to achieve. Advantage: the sealing is good, the sealing strength is big, the junction and the pipe material strength is even. It is suitable for the project of low pressure requirement of good geological condition or water. (2) the electr