Q345E大规格H型钢(国外英文资料).docVIP

Q345E大规格H型钢(国外英文资料) 31 (2) In April 2009, Shandong metallurgical April2009 ShandongMetallurgyVol. 31, No. 2 Abstract: time limitation of Q345E large size h-beam way research found that less influence aging on the impact toughness and 40 ℃, using the energy method to determine the steel brittleness at low temperature Curve, the brittle transition temperature range for - 30 ~ 40 ℃. The analysis of the shock fracture, the macroscopic and microscopic appearance of the fracture and the microscopic appearance of the inclusions The analysis of electron probe spectrometry shows that the main causes of low temperature impact toughness are serious banded tissues and non-metallic inclusions in steel. Key words: H shaped steel; Low temperature impact toughness; Aging; Banded structure. inclusions Middle image classification number: TG113; TG115 document identification code: an article number: 1004-4620 (2009) 02-0040-03 Release date: 2008-12-23 Dong changxing, male, born in 1972, graduated from chengde petroleum in hebei province in 1994 Technical college, major in industrial analysis. I am now a quality supervisor in the quality assurance department of laishan Be engaged in quality inspection of steel products. 1 introduction The Q345E steel factory produced by laishan steel factory is in the beginning Fig.5 found to 40 ℃ impact AkV value is low and volatile, However, after two weeks or so, the AkV value increased significantly, mostly Several furnaces meet product standard requirements. In order to improve the steel plant Low temperature impact toughness and shorten aging time The condition of the goods and the port of collecting, the series of experiments on the steel type H section steel And test analysis. System experiments with different adverse measures, The hope is to find the best way of aging; On the other hand, the macro of the impact sample View fracture, microfracture, organization form and inclusions distribution and appearance Analysis can determine the Q345E of