szgc0102(国外英文资料).docVIP

szgc0102(国外英文资料) 1K411014 is familiar with the composition and material of asphalt mixture One, structural composition and classification (1) composition of materials 1. Asphalt mixture is a kind of composite material, mainly composed of asphalt, aggregate, fine aggregate, mineral composition, some still into polymer and wood cellulose batch of the floorboard of the mixture. 2. The structure of the asphalt mixture depends on the following factors: mineral skeleton structure, the structure of asphalt and mineral material and the characteristics of the interaction between asphalt and asphalt mixture of compactness and capillary porosity structure characteristics. 3. The mechanical strength of asphalt mixture, mainly composed of mineral particles between the force of friction resistance and embedded in the crowded, cement and asphalt and mineral aggregate bond between. (2) basic classification According to the composition of the material and the size of the voids, it is divided into the combination of the grades, the half opening and the mixing materials. 2. Can be divided by the size of the nominal maximum particle size, coarse type (nominal maximum size is greater than 31. 5 mm), coarse grain type (nominal maximum size is equal to or greater than 26. 5 mm), medium, fine particle and sand grain type (nominal maximum size is less than 9.5 mm) asphalt mixture. According to the production process, it is divided into hot mix asphalt mixture, cold mix asphalt mixture and recycled asphalt mixture. (3) structural types 1. According to the principle of embedded squeeze to form the structure strength of asphalt mixture, based on mineral particles embedded squeeze force and the friction between the supplemented, asphalt binder bonding effect. The structure of the asphalt mixture is less affected by temperature. 2. According to the principle of dense gradation of asphalt mixture, composed of structural strength, is the bond between asphalt and mineral aggregate, mineral particle