三线、一面的疑问解答(国外英文资料).docVIP

三线、一面的疑难解答(国外英文资料) In the center line of the outer wall, L is calculated from outside the outer wall (1) the length calculation of the outer wall of the outer wall of the outer wall (the outside of the outer wall of the outer wall is a right Angle) The length of the outer wall of the outer wall is the length of the total length of each section of the wall. The position of the outer wall axis and the center line are centered and partial in different engineering designs. Therefore, in addition to the wall of the axis, the length of the centerline of the axis is not equal to the length of the axis. Since the center line of the 240 exterior wall is coinciding with the axis, the length of the center line of the 240 exterior wall is the length of its axis. Axis, exterior wall thickness is equal to 370 and older, its centerline axis between a eccentricity with c (see figure 1 a, b), therefore, when calculating the volume of base, must will be the outer walls of the eccentricity axis length is converted to the center line. The external axis of the outer wall has a partial outer and partial inner center, and the eccentricity is the absolute value of the distance between the thickness of the wall and the outer surface of the wall. So, the eccentricity of the outer wall: C = 3702-120 = 65 mm The center line of the outer wall is on the basis of its axis length adjustment calculation, when 370 wall partial (see figure 1 a), the axis of the outer wall length axis (L) is greater than its centerline length (L), therefore, L length is equal to the outer wall of axis length minus 8 c. Namely: L = L outer shaft - 0  in 52 m (1, 1) (a) 370 exterior axis of outer wall; (b) the axis of the outer wall of 370 Figure 1 In the same way, when the exterior of the outer wall of 370 is within, (see figure 1b), the length of its axis is less than the center line length, so the length of L is equal to the length of the outer wall of the outer wall plus 8c. Namely: L = L outer shaft + 0  52 m (1