主厂房土方回填计划(国外英文资料).doc

主厂房土方回填方案(国外英文资料) Backfill plan of the main plant 1, engineering overview: The natural floor level of the main factory is between -2.7 and -2.2. In order to design the above 0.000 elevation and natural ground level, the soil is required to be reclaimed and the refill project is large. The amount of land in the workshop area is approximately: 150000m3. 2, preparing the basis: Construction manual (4th edition). 2.2 million tons master factory construction drawings. The uniform standards for the acceptance of construction quality of construction projects. Gb50300-2001. Construction foundation, quality acceptance of foundation construction. Gb50202-2002. Construction sequence: Clearing clutter, leveling ground, paving soil, soil ramming, testing and delivery. First, the backfill area is higher than the natural floor area (such as the rail base area of the ladle), and the area is returned to the outside of the pile to be greater than 1 m. And then you fill in the rest. 4, physical engineering: The name of the unit The number of Plain soil The m3 150000 Machine input: The machine is two, the earth car 20, the loading machine 3 ~ 4, the bulldozer 2, the frog type ramming machine 20, the hammer type ramming machine 10. Labor input: Unskilled labourer, 100. Main construction procedure: 7.1 basis processing: 7.1.1 venue to backfill should be clear the rubbish on the basal, grass, tree roots, the water in the foundation pit of sundry, stagnant water and measures should be taken to prevent the surface into the fill area. 7.1.2 when the ground is filled with soil, the foundation shall be fully compacted and compacted. 7.1.3 when fill the mud pit near dewatering well loose land of big water content, such as drainage drainage should be taken according to the specific situation, or will all dug in silt soil, gravel filling, filling sandy gravel and other measures to deal with. 7.2 earth requirement: The fill should meet the design requirement and ensure the strength and stability