吊车梁在移动载荷感化下的照顾剖析(国外英文资料).docVIP

吊车梁在移动载荷作用下的响应分析(国外英文资料) The response analysis of the crane beam under the action load Problem description As shown in figure 2-1 for crane girder, the moving load on the beam at a speed of 1.0 m/s from one end of the beam to the other, calculation of crane beam in the process of displacement and stress response. Elastic modulus EX =; Poisson ratio PRXY = 0.3; The density of the DENS =. The crane beam USES the work type section as shown in figure 2-2. ; ; ; It is. Analyzing the steps (1) analysis of environmental Settings The work file name is called CRANE BEAM ANALYSIS, and the graph is called CRANE BEAM ANALYSIS. 1) Enter the ANALYSIS/Multiphysics program interface, the Utility Menu, select Menu options Menu File - Change Jobname command, a Change Jobname dialog box, in [/ FILNAM] Enter new Jobname File name text box input work CRANE - BEAM ANALYSIS, click the OK button to close the dialog box. 2) select the Menu Utility Menu: File to Change Title command, show the Change Title dialog box, enter the graphics Title in the text box, CRANE - BEAM ANALYSIS, click OK button to close the dialog box. Click the SAVE_DB button storage disk on the toolbar. (2) define the unit type Select BEAM188 as unit 1. 1) select Menu Main Menu: Preprocessor, Element Type, Add/Edit/Delete command. Click the SAVE_DB button storage disk on the toolbar. (3) define the material parameters The model is the i-steel, the elastic modulus EX, the poisson is 0.3, the density of the densities. 1) select Menu Main Menu: Preprocessor, Material Props, and Material Models commands. Click the SAVE_DB button storage disk on the toolbar. (4) to define the section of the beam 1) Main Menu select Menu: the Preprocessor - Sections - Beam - Common Sections command, pop-up Beam Tool dialog box, enter 1 in the ID text box, in W1, W2, W3, t1, t2, t3, text box input respectively 0.15, 0.15, 0.3, 0.02, 0.02, 0.01, Coarse Fine adjustment to 2, click the OK button to close the dialog box. 2) inventory. Click the S