培土路肩、中间分隔带回填土、土路肩加固及路缘石水工(国外英文资料).docVIP

培土路肩、中央分隔带回填土、土路肩加固及路缘石水工(国外英文资料) Section 1: the shoulder of the soil, the central dividing belt, the backfill of the earth, the shoulder reinforcement and the road The scope of The work of this section includes the backfill soil of the road shoulder and the central dividing belt, and the construction of the soil and shoulder reinforcement. material The materials used for the backland and the central separation zone shall conform to the drawings and the requirements of the standard 204.02. Cement concrete shall conform to the drawings and the requirements of section 410 of this specification. The mortar shall conform to the drawings and the requirements of section 413 of this specification. Construction requirements After the paving of the road, the construction of the road shoulder and the central separation zone shall be completed, and the drawings and supervisory engineers shall indicate the construction work. The construction technology and requirements for the backfill soil of the road shoulder and the central dividing belt and the requirements of the standard 204.04 are in accordance with the requirements of the drawing. The surface shall return to the soil in accordance with the instructions of the drawing or supervision engineer. Prepare for your shoulder straps (1) to measure the height and width of the construction before construction, when the drawing is not in conformity with the requirements of the drawing, it shall be trimmed in time; The compaction of the soil shoulder should meet the above 95% of the heavy hitting standard, and the roadbed changes should meet the drawing requirements. (2) the construction of prefabricated blocks or concrete reinforced concrete work should be done by the supervision engineer for examination and approval. Concrete prefabricated block to reinforce the dirt shoulder (1) the size of the concrete precast blocks according to the drawing requirements should be in prefabricated prefabricated centrally, and after inspection q