新老路基搭接施工8(国外英文资料).docVIP

新老路基搭接施工8(国外英文资料) The Cambodian national 59 highway reconstruction project construction technical disclosure Attachment 8 new old roadbed construction technology to meet the base 1, the construction method, Excavator on new fill subgrade of old subgrade slope on the surface soil to clean up, on the same slope up the steps, step width to the width of the side slope digging, generally not less than 1 m wide. The slope is 4 percent, and the slope rate is 4 percent. At the step of the step, cooperate with artificial spread flat, must make the step contact surface is not floating, the line is flat, the interface is clean. To run the roadbed with the roller, and the compaction procedure complies with the rules of the earths road foundation. Steps of compaction, the steps on the earth, and a large new subgrade compaction, in conjunction with patch on the touchline, due to the inconvenience, roller compaction, no artificial fill with hydraulic vibration rammer; Make it as compacted as the new roadbed. To test the compactness in the method of irrigation; Inspection, except by normal standard test compaction, plus offset point on the stairs, on the steps of compaction control standards in line with the same height of the new roadbed. In the final layer of the road bed, the earth machinery of the shoulder part of the road first flattens, and then the artificial level of the earth, and then the compaction is compacted. 2, quality measures With the original roadbed lap is related to the quality of the original roadbed, also relates to the quality of the new roadbed, so the steps, must make to the original position of the subgrade compacted soil, real-time, along with a right roadbed compaction; In particular, we should draw the spot on the step to test the compaction quality. 3, roadbed repair In this project, the subsection of the road foundation includes the following contents: the road bed is flat, compacted and the slope is trimmed. The soil and embankment slopes are direct