AD转换毕业设计.docVIP

AD转换毕业设计 应用ADC0809的A/D转换设计 摘要 此次设计的主要内容是利用ADC0809设计制做A/D转换器，电位器提供模拟量输入，编制程序，将模拟量转换成二进制数字量，51单片机通过8255的PA口输出到发光二极管进行显示，并将8位二进制数转换为3位BCD码并在3位数码管上进行显示，并在此基础上进行扩展。 由于热敏电阻输出量为模拟量，同样通过ADC0809进行A/D转换，并将其输出值在发光二极管以及3位数码管上进行显示，来反映温度的变化。压力传感器的输出量经过ADC0809进行模数转换后经发光二极管以及数码管的显示来反映压力的变化。 关键词：ADC0809 A/D转换 51单片机 发光二极管 数码管 the design of the A/D conversion based on ADC0809 Abstract The main content of this design is that use the ADC0809 make a A/D conversion.The ADC0809 get Analog signal from Potentiometers. Program and transform it into Digital as Binary. The 51Single-chip sent the digital to Light-emitting diodes by the A I/O interface of 8255，change the 8 bit Binary number into 3 bit BCD code , then develops it. The output of the thermistor is analog, use the ADC0809 make a A/D conversion and sent to Light-emitting diodes and Digital tube display it the aim is to Reflect the diversification of temperature. ADC0809 change the output of pressure sensor into digital data and Be displayed by Light-emitting and Digital tube,from this we can see the change of pressure we gave. Keywords:ADC0809A/Dconversion 51Single-chip Light-emitting 目录 1 绪论 ............................................................. 1 1.1 A/D转换概述 ................................................ 1 1.1.1 A/D转换的概念 ........................................ 1 1.1.2 A/D转换器的类型 ...................................... 1 1.2 A/D转换在现实中的应用 ...................................... 1 2 A/D转换的硬件介绍 ............................................... 2 2.1 总体硬件介绍 ............................................... 2 2.2 电位器概述 ................................................. 2 2.3 ADC0809概述 ................................................ 3 2.3.1 ADC0809的内部逻辑结构 .................................... 3 2.3.2 ADC0809的外部特征 .................................... 4 2.3.3 逐次逼近型A/D转换方法 ................................ 5 [4]2.4 MC51单片机概述 ................