MiniGUI3.0.12安装与移植.docVIP

MiniGUI3.0.12及组件下载地址/downloads/index.html libmgplus-1.2.4下载地址/download/yong_f/4062807 1. 需要下载的组件 libminigui-gpl-3_0_12.tar.gz mg-samples-3_0_12.tar.gz freetype-1_3_1.tar.gz jpegsrc_v7.tar.gz libpng-1_2_37.tar.gz minigui-res-be-3_0_12.tar.gz zlib-1_2_2.tar.gz qvfb2-2.0 libmgplus-1.2.4(可以在csdn上下载到) (qvfb所需要的包) libqt3-mt libqt3-mt-dev alien qt-devel-3.3.8-4.fc7.i386.rpm 2.安装各组件 1libminigui-gpl-3_0_12.tar.gz(库) ./configure --prefix=/usr/local --enable-qvfbial --disable-splash --disable-screensaver sudo make sudo make install 2minigui-res-be-3_0_12.tar.gz（资源包） ./configure --prefix=/usr/local sudo make sudo make install 3freetype-1_3_1.tar.gz ./configure --prefix=/usr/local sudo make sudo make install ( 在安装时会有ftdump.c的预处理标识符错误，修改./test/ftdump.c里的 Print_Mem( memory_footprint.##field, string ) 改为 : Print_Mem( memory_footprint.field, string ) #define FOOTPRINT( field ) Save_Memory( memory_footprint.##field ) 修改为:#define FOOTPRINT( field ) Save_Memory( memory_footprint.field ) ) 4安装PNG库 ./configure --prefix=/usr/local sudo make sudo make install 5安装JPEG库 ./configure --prefix=/usr/local --enable-shared sudo make sudo make install 6安装zlib库 ./configure --prefix=/usr/local sudo make sudo make install 7libmgplus-1.2.4 ./configure --prefix=/usr/local sudo make sudo make install 将/usr/local/lib加入到.bashrc中 8安装qvfb2 (因为需要qt-3.3作支持，所以需要先安libqt3-mt,libqt3-mt-dev,下载qt-devel-3.3.8-4.fc7.i386.rpm,然后用alien转为deb,再用dpkg -i --force-overwrite 来安装此包) sudo apt-get install libqt3-mt sudo apt-get install libqt3-mt-dev sudo apt-get install alien sudo alien qt-devel-3.3.8-4.fc7.i386.rpm dpkg -i --force-overwrite qt-devel-3.3.8-4.fc7.i386.deb (开始安qvfb) cd qvfb2-2.0 ./configure --with-qt-includes=/usr/lib/qt-3.3/include --with-qt-libraries=/usr/lib/qt-3.3/lib --with-qt-dir=/usr/lib/qt-3.3 sudo make sudo make install (qvfb2与1不同，没有文件输入是不会显示出框图的) 9修改MiniGUI.cfg [system] # GAL engine and default options gal_engine=pc_xvfb（修改此处） defaultmode=640x480-16bpp（修改此处） # IAL engine ial_engine=qvfb mdev=/dev/input/m