28M趸船船体说明书(国外英文资料).docVIP

28M趸船船体说明书(国外英文资料) 28m distaff hull specification According to the contents of the tender documents in chapter 3 of the tender documents, the special requirements of the purchaser and the writing of the existing regulations. 1, an overview of the Purpose, design principle: the pontoon is mainly used for vessel and maritime law enforcement boat docked, and as the water law enforcement, office and enforcement boat crew and staff living place. This vessel life and office facilities equipped for the crew and staff to create comfortable and convenient working environment and living conditions, requirements: safety, environmental protection, energy saving, office, living fully functional. It embodies the idea of people-oriented design. The design of the ship is based on the following rules, regulations and requirements: (1) the building code for the shipbuilding of the steel inner river (2009) and the modification report (2012), (2014); (2) the technical rules for the legal examination of the ships in inland waters (2011); Construction requirements including all ship construction, environmental protection material internal decoration, equipment, ship test, delivery and not less than 1 year free after-sales, on-site technical support services, etc. Main parameters, overview of the hull; Total length: oa L 28.30 m Line length: WL L 28.0 m Type width: B 10.00 m Type depth: D 1.8 m Design draft: d 0.9 m Shipman: twelve Class B (in grade A) Hull structure: The ship is a single bottom, single deck structure, two deck decks, and steel fully welded pontoon. Ships skeleton is transverse frame type, all the side for the transverse frame type main frame system (including the deckhouse vertical stiffener and the main body frame) on the same vertical line, rib spacing of 0.50 m, the whole ship 1, the main keel next keelson 8. Each deck of the deck is half a m, and the component size is the same as the deck girder. The main hull has four transverse bulkheads. The main hull plate, deck