DC电源插座什么是无源功率因数校订(国外英文资料).docVIP

DC电源插座什么是无源功率因数校正(国外英文资料) DC power socket what is passive power factor correction Passive power factor correction PFC is also called passive PFC. The waterproof light touch switch is the passive component of the ac input circuit. Light touch switch inductors for correction, to reduce the suffering of the ac input current and voltage, phase difference between the headphone socket switch in order to improve the power factor of the blade. Although the circuit of passive power factor is simple, the cost is low. But has the following disadvantages: 1 you need to use the heavy volume of 50 hz frequency inductor, which greatly limits its practical application, 2 improve the power factor of the effect is limited, not using PFC switching power supply, power factor is 0.5 ~ 0.6, increasing power frequency inductor can only to increase the power factor to 0.8 or so, after 3 to gm in the global scope, must increase the switch S, easily because of wrong operation and cause serious harm to power supply and load. Self-locking switch, a common self-locking switch, is a common button switch. On the first time on the switch button, the switch is switched on and maintained, namely the self-lock, on the second time on the switch button, the switch is off, and the switch button pops out. Latching switch generally refers to the switch bring mechanical locking function, press down, let go after the button is not completely jump, is locked, need to press again, jumped to unlock completely. Its called a self-locking switch. The early direct, full-power TV sets and monitors were the switches used. With lamp latching switch with ordinary latching switch the difference only lies in: with lamp switch make full use of its key planted a small space in the indicating lamp or LED,Its one end to the zero line, on the other side usually by a step-down resistance with the normally open contact of the switch in parallel, when the switch is closed, the equipment operation but also provide the power ind