EPS的日常维护(国外英文资料).docVIP

EPS的日常维护(国外英文资料) EPS emergency power supply daily maintenance system First, daily maintenance and management 1, parts and components (1) confirm that the battery has no concave and convex appearance, show the control screen is normal, and the signal is in good condition. (2) all kinds of appliances, instruments and signals on the screen, plate, box and cabinet are complete, and the installation is correct, firm, clean and clear. (3) the circuit connection is reasonable, neat, beautiful, the cable sign and various terminal Numbers are correct, complete, conductor and cable cut meet the requirement. (4) all bolts shall be secured and the secondary circuit shall meet the requirements. (5) the switches are flexible and electronic components are in good condition. (6) the battery output has the necessary protection of short circuit, low voltage and overvoltage, etc. (7) the battery cabinet is strong enough to meet certain shock resistance requirements. Good insulation resistance should be above 1000 ohm. 2, operation performance (1) it is normal to switch the power supply. (2) the inspection, testing period and the characteristics and errors of the components are in accordance with the relevant regulations. (3) the equipment is reliable, the test and the operation are correct. (4) the equipment performs well. (5) the output load of EPS is controlled at about 60% Contravariant performance, stable performance, steady flow performance, dynamic characteristics meet requirements. (7) the battery charging and inverter can meet the need of full load operation. 3, environmental requirements, (1) the ventilation is good, the equipment is clean, the ventilation is unobstructed. (2) the equipment and the surrounding ground are clean, clean and uncluttered, not easy to produce dust. (3) the doors and Windows are complete without rain. There shall be no corrosive or acidic gases surrounding the device. (5) the indoor lighting is sufficient, the insulation is complete and good, the n