教你选购钢板的深浅可否适合(国外英文资料).docVIP

教你选购钢板的深浅是否合适(国外英文资料) Teach you how to choose the depth of the steel plate Teach you how to choose the depth of the steel plate A: this is A printing technique that transprints the pattern on the steel plate to the object by making it intermediates with A concave glue head. B: the pad printing, the depth of the steel plate, plastic head of the characteristics of hard and soft, size, shape, printing ink, volatile speed, the printing surface characteristics (smooth or rough, the arc size, etc.), working environment control (temperature, for example, color, moisture, dust, etc.). The changes in the related parameters must be processed and adjusted to be successful. C: the depth of the steel plate is appropriate. A depth gauge is used to measure the depth of the plate with a depth of 2.4 microns. If the text is small, the line is 2 microns. Physical images, which are also suitable for 3 microns, are likely to be a little deeper. The concrete steel plates are very shallow. 2, it depends on the actual design and the requirements of the ink layer. It is also like an image, if the surface of the printing work is rough, the surface of the face or the smooth, the steel plate depth is required to have the printing effect. For example, if the oil is returned to oil, the image is blurred and the greater possibility is too deep for the plate, which may be too shallow for the return of a bubble (trachoma). If the glue head is not printed on the object, the ink on the top of the glue is too shallow. If the ink on the glue is not flat (orange peel), the plate is too deep. Because the glue head can only touch a small part of the ink in the area of the steel plate, it wont be helpful to etch too much. When the depth of the etch is 25 microns, the glue head can only touch the ink film of 12 microns, and the rest is left on the plate. Due to the ink film contains at least 40% of the diluent, this part of the diluent in the ink transfer and drying Completely evaporate, so finally stay w