椭圆的几种画法(国外英文资料).docVIP

椭圆的几种画法(国外英文资料) Topic 2: several ways of painting the ellipse (this topic is suitable for higher math required courses) Model: 92 - Plus The teaching process: We know that the length of the ellipse is a, and the shorter half axis is b. Display rectangular coordinates, with the origin as the circle of two concentric circles, the radius is a and b. (see figure 1) The origin is a Ray (F2, 6 Ray), this Ray makes two circles in M, N (F2, 3 Intersection Point) (see figure 2). (figure 1) (figure 2) 3. Press F4, 1, Perpendicular Line, Perpendicular to the y M point for straight Line, a N points as a straight Line Perpendicular to the x axis. The Intersection of two lines is P (F2, 3 Intersection Point), which hides unwanted lines. 5. Press F7, 2 (Trace On/Off), the cursor point to point P, press Enter, then the cursor point to ray, hold, and move the cursor key direction, the trajectory of P - oval (long axis On the x axis). (see figure 3) In the above process, if the M dot is perpendicular to the X-axis line, then the line of N points is perpendicular to the Y-axis, and the two lines intersect the path of P (the long axis is on the Y-axis). (see figure 4) (figure 3) (figure 4) According to the definition of the ellipse, the condition is two points, and a line segment AB (the distance between the two points). Method one: In a new window, draw two points F1, F2, and a line segment AB. Take the length of the line segment AB as the radius and make a circle (F4, 8 Compass) for a fixed point F1. (see figure 5) Take a little P (F2, 2) on a good circle, and connect PF1 (F2, 5) (see figure 6). (figure 5) (figure 6) 4. Be PF2 Perpendicular Bisector (F4, 4 Perpendicular Bisector), PF1 in M (F2, 3), join again MF2 (F2, 5), and so make MF2, MF1 equals fixed-length AB. (see figure 7) You can hide unwanted lines by F7 and 1. If you press F4, A (Locus), you choose the dot M, and then you choose the point P, Wait for a moment, a curve that will appear elliptical. (see figure 8) (figure 7)