烟花塑料底座多向斜抽芯注射模设计.pdfVIP

模具工业 2016 年第42卷第 12 期 45 … … … … ， 四 剧 赖 术 J 叫 … … 烟花塑料底座多向斜抽芯注射模设计 杨 军，曾霞文，王雪红，景晓阳，龙风凉，杨昌远 (湖南工业职业技术学院，湖南长沙 410208) 摘要:分析了烟花底座的性能妥求和工艺特点，介绍了成型该塑件注射模的结构、工作过程及制造特 点，叙述了迄杆顶出式多向斜抽芯机构的设计要点，解决了 4 个倾斜角度不同的小困筒在脱棋时的侧 向分型与抽芯问题，该模具结构紧凑、合理，生产的塑件达到使用要求. 关键词:烟花底座;抽芯机构;连杆顶出式;注射模 中图分类号:TG76; TQ320.662 文献标识码:8 文章编号: 1 ∞1-2168(2016)12-∞45-04 DQI : 10. 16787/j.cnki.l 00 1-2168.dmi.2016.12.011 Design of injection mould with multi-ram inclined core-pulling for plastic firework base YANG Jun, ZENG Xia-wen, WANG Xue-hong，且NG Xiao-yang, LONG Feng-liang, YANG Chang-仰韶 (Hu,nan Industry Polytechnic, Changsha, Hu nan 410208, China) Abstract: The pe Iformance requirements and structural characteristic of a plastic fireworks base were analyzed. The structure, working process and manufacturing characteristics of an i时ection mould for the plastic were described. The key points in designing the multi-ram inclined core-pulling mechanism through ejecting by connec由\g rod were stated in deta且. It resolved side p彼ting and core-pulling problem because of the four different inclined an- gles. The mould was compact and reliable , and the pl挡住c met the usage req田rement. Key words: frreworks base; core-pulling mechanism; ejec伽g by connecting rod; ÍI\Íection mould 2 塑件结构特点与工艺分析 l 引言 图 1 所示为一款升空类火箭烟花的底座塑件， 塑料制品在烟花爆竹产品中的应用是现代塑 料科技对烟花爆竹制造业的一大贡献，随着现代烟 材料为高密度聚乙烯(HDPE)。 塑件形状为前后、左 右对称的盒形件，4 个带底小圆筒斜置于上方。塑 花爆竹产品构型的不断发展，塑料制品在烟花爆竹