Ti-6Al-4V合金喂料临界粉末装载量的研究.PDF

上半月出版 Casting Forging Welding 金属铸锻焊技术 Ti-6Al-4V 合 喂料临界粉末装载量的研究 1 2 2 王家惠 史庆南 席健 渊1.昆明理工大学 城市学院袁云南 昆明 650051 曰2. 昆明理工大学 材料科学与工程学院袁云南 昆明 650093冤 摘 要院研究了4 种不同蜡基粘结剂配方下钛合金喂料的临界固体粉末含量袁并测试了临界固体粉末含量下喂料 # # # # 的流变学参数遥 实验结果表明院1 喂料(100%PW) 尧2 喂料(95%PW+5% SA) 尧3 喂料(70%PW+25%PE+5% SA) 尧4 喂料 (60%PW +35%PE +5%SA) 的临界粉末装载量(vol.%)分别为院70% 袁71.53% 袁72.24% 袁73.02% 曰经流变学分析袁临界粉末 载量下喂料仍呈假塑性流体袁但其流动指数n 值较小袁在0.2 以下袁不利于成形遥 关键词院粉末注射成形曰钛合金曰临界粉末装载量曰流变特性 中图分类号院TG146.2+3 文献标识码院A 文章编号院 Research on Critical Powder Loading for Ti-6Al-4V Alloy Feedstocks 1 2 2 WANG Jiahui , SHI Qingnan , XI Jian (1. City College, Kunming University of Science and Technology, Kunming 650051, China; 2. College of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China) Abstract 院Critical p owder loading of Ti-6Al-4V alloy feedstocks with four different wax-based binders were investigated and rheological measurements of feedstocks at critical powder loading were performed in a capillary rheometer. The results show that the critical powder loadings of 1# feedstock (100%PW), 2# feedstock(95%PW+5% SA), 3# feedstock (70%PW+25%PE+5% SA), 4# feedstock (70%PW+25% PE+5% SA) is 70vol% 袁7 1.53 vol% 袁72.24 vol% 袁73.02 vol%, respectively. Through rheological analysis, the feedstocks at critical powder loading are p