热加工方式对双合金结合界面组织与力学性能的影响-中国有色金属学报.PDF

20 1 2010 10 Vol.20 Special 1 The Chinese Journal of Nonferrous Metals Oct. 2010 1004-0609(2010)S1-s0320-05 1 1 1 2 2 , (1. 710072 2. 100081) Ti AlNb/TC11 2 Ti2AlNb/TC11 72% Ti2AlNb/TC11 TG 146.4 A Effect of hot working method on interfacial microstructures and mechanical properties of dual alloy 1 1 1 2 2 YAO Ze-kun , TAN Li-jun , GUO Hong-zhen , ZHANG Jian-wei , LIANG Xiao-bo (1. School of Materials and Engineering, Northwestern Polytechnical University, Xi’an 710072, China; 2. Central Iron Steel Research Institute, Beijing 100081, China) Abstract: The interfacial microstructure and mechanical properties of Ti AlNb/TC11 dual alloy jointed by electron beam 2 weld and linear friction weld before and after near isothermal deformation and heat treatment were investigated. The results show that the grain size on interface of sample welded by the electron beam weld is refined obviously by near isothermal deformation and heat treatment couple. The chemical components at the interface of dual Ti2AlNb/T11 alloy are changed by isothermal deformation and heat couple treatment. The microstructure transform step by step through the weld line due to diffusion of element and re-construction of crystal lattice, the tensile strength and plasticity increase obviously after near isothermal deformation followed by solution and aging t