PIC系列C语言编程实例.docVIP

PIC系列C语言编程实例 //PIC C语言 显示屏外圈电路 //外圈模式: 单方向的 //主芯片：PIC16C54 //更改日//版本:01 #include pic.h #include math.h #include stdio.h //一个全局的或静态的变量可以定位绝对地址, 使用如下格式 //unsigned char Portvar @ 0x06; //这里定义了一个名为Portvar的变量, 地址为06h，注意，编译器并不保留任何 //单元，仅仅是将一个变量分配在06h 单元. 它等价于汇编语言: _Portvar EQU 06h //编译器及连接器都不作任何检查, 完全由程序员保证分配不会发生冲突. //#define TRISc = 0x05; //#define TRISB = 0x06; /* STATUS bits */ //static bit GPWUF @ (unsigned)STATUS*8+7; //static bit PA0 @ (unsigned)STATUS*8+5; //static bit TO @ (unsigned)STATUS*8+4; //static bit PD @ (unsigned)STATUS*8+3; //static bit ZERO @ (unsigned)STATUS*8+2; //static bit DC @ (unsigned)STATUS*8+1; //static bit CARRY @ (unsigned)STATUS*8+0; static volatile unsigned char myvar @ 0x15; static bit t0ycbz@(unsigned)myvar*8+7; unsigned char crpaztdat; //状态指示 unsigned char degree; //计次 unsigned char degree02; //计次 unsigned char degree03; //计次 #define chu RA3 #define ru RA2 #define ping RA0 #define an RA1 #define lck RB0 #define sck RB1 #define sdi RB2 #define led1 RB4 #define led2 RB5 #define led3 RB6 unsigned char a; //数组寻址单元 unsigned int intdat; //显示暂存单元 //const unsigned int dispbuf[4]={0x0000,0x0000,0xfefe,0xfffe}; //code //const,ROM; static,固定RAM void SPIINIT(void) //初始化子程序 { TRISA = 0X00; //A口引脚为输出 TRISB = 0X00; //B口引脚为输出 #asm movlw 0x07 //把分频器给定时器用并置256分频 option #endasm } void csxsdata(unsigned int dat,unsigned char deg) //74H595操作/dat数据/degree输出位数 { for(;deg0;deg--) { asm(clrwdt); //看门狗 sck = 0; //输入数据时钟 lck = 0; //移位时钟 asm(nop); dat = dat 1; sdi = CARRY; asm(nop); asm(nop); asm(nop); asm(nop); lck = 1; //输入数据时钟 asm(nop); asm(nop); asm(nop); asm(nop); lck = 0; //输入数据时钟 asm(nop); asm(nop); asm(nop); asm(nop);