TVS二极管P6SMB选型手册(规格书).pdfVIP

【领先的片式无源器件整合供应商 — 南京南山半导体有限公司 】 P6SMB SERIES DATA SHEET TRANSIENT VOLTAGE SUPPRESSORS – P6SMB SERIES FEATURE For surface mounted applications in order to optimize board space. Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Excellent clamping capability. Repetition Rate (duty cycle):0.01%. SMB/DO-214AA Fast response time: typically less than 1.0ps from 0 Volts to VBR for unidirectional types. Typical IR less than 1μA above 10V. High Temperature soldering: 260°C/10 seconds at terminals. MECHANICAL DATE Case: JEDEC DO214AA. Molded plastic over glass passivated junction. Terminal: Solder plated, solderable per MIL-STD-750, Method 2026. Polarity: Color band denoted positive end (cathode) except Bidirectional. Standard Packaging: 12mm tape (EIA STD RS-481). Weight: 0.003 ounce, 0.093 grams. DEVICES FOR BIPOLAR APPLICATION For bidirectional use CA suffix for types P6SMB6.8CA thru types P6SMB550CA, electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25ambient temperature unless otherwise specified. RATING SYMBOL VALUE UNITS Peak Pulse Power Dissipation on 10/1000s waveform PPPM Minimum 600 Watts (Note1,Note2, Fig.1). Peak Pulse Current of on 10/1000s waveform.(Note1,Fig.3) IPPM See Table Amps Steady State Power Dissipation at TL =75,Lead lengths.375”,