毕业论文外文翻译-PLC控制器.docVIP

华中科技大学文华学院 毕业设计（论文）外文文献翻译 （本科学生用） 题 目：Plc based control system for the music fountain 学 生 姓 名：_ ___学号：060108011117 学 部 （系）: 信息学部 专 业 年 级: _06自动化（1）班_ 指 导 教 师： ___职称或学位： __ 20 年 月 日 外文文献翻译（译成中文1000字左右）： 【主要阅读文献不少于5篇，译文后附注文献信息，包括：作者、书名（或论文题目）、出 版 社（或刊物名称）、出版时间（或刊号）、页码。提供所译外文资料附件（印刷类含封面、封底、目录、翻译部分的复印件等，网站类的请附网址及原文】 英文节选原文： Central Processing Unit (CPU) is the brain of a PLC controller. CPU itself is usually one of the microcontrollers. Aforetime these were 8-bit microcontrollers such as 8051, and now these are 16-and 32-bit microcontrollers. Unspoken rule is that you’ll find mostly Hitachi and Fujicu microcontrollers in PLC controllers by Japanese makers, Siemens in European controllers, and Motorola microcontrollers in American ones. CPU also takes care of communication, interconnectedness among other parts of PLC controllers, program execution, memory operation, overseeing input and setting up of an output. PLC controllers have complex routines for memory checkup in order to ensure that PLC memory was not damaged (memory checkup is done for safety reasons).Generally speaking, CPU unit makes a great number of check-ups of the PLC controller itself so eventual errors would be discovered early. You can simply look at any PLC controller and see that there are several indicators in the form. of light diodes for error signalization. System memory (today mostly implemented in FLASH technology) is used by a PLC for a process control system. Aside form. this operating system it also contains a user program translated forma ladder diagram to a binary form. FLASH memory contents can be changed only in case where user program is being changed. PLC controllers were used earlier instead of PLASH memory and have had EPROM memory instead of FLASH memory which had to be erased with UV lamp and programmed on programmers. With the use of FLASH technology this process was greatly shortened. Reprogramming a program memory is done through a serial cable in a program