对协同处理技术作为印尼含油污泥废弃物处理的一种整体....pdf

SPE 136601 Assessment of Co-Processing Technology as a Total Solution to Treat Oily Sludge Waste in Indonesia Bakhtiar Nofti C, Indra Sembiring, Alkifli Adnan, Agung Imantyoko, Pertamina EP Copyright 2010, Society of Petroleum Engineers This paper was prepared for presentation at the SPE Middle East Health, Safety, Security, and Environment Conference and Exhibition held in Manama, Bahrain, 4–6 October 2010. This paper was selected for presentation by an SPE program committee following review of information contained in an abstract submitted by the author(s). Contents of the paper have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material does not necessarily reflect any position of the Society of Petroleum Engineers, its officers, or members. Electronic reproduction, distribution, or storage of any part of this paper without the written consent of the Society of Petroleum Engineers is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of SPE copyright. Abstract Upstream oil gas sector commonly generate oily sludge wastes. This waste can be treated with many methods according to the technical-economic assessment. Recently, co-processing technology usually being chooses in Indonesia. Therefore we need to evaluate co-processing in the legality, technique and economic aspects as the treatment option in Indonesia. The use of co-processing technology as Alternative Fuel and Raw Materials AFR) in cement industry can be implemented into 3 categories, i.e. co-processing of waste, alternative raw materials and mineral components. According to the legality assessment, co-processing comply with Ministry of Enviro