出货检验报告 -中英文版.docx

Outgoing Quality Control ReportInspection Date:Customer NameOrderNo.Product NameSpecification Total Production QuantityResult :□NG NOT GOOD □OKSampling Standard:Sampling Inspection InstructionQuality Requirement：CR:(CRITICAL) 0 MA(MAJOR):0.4MI(MINOR):1.0一、?Visual and Dimensional InspectionNo.PartsInspection ItemsInspection MethodTest equipmentDefectResultsRemarkNGOKUnacceptable 1Outside Carton1.1Damage/ DirtVisual InspectionVisual Inspection1.2Length* Width* Height Check it up with BOMCalipers1.3 Content/stickiness/damage of the tags Check it up with dataVisual Inspection2Inner Box2.1 Damage/ DirtVisual InspectionVisual Inspection2.2 Length* Width* HeightCheck it up with BOMCalipers2.3 Content/stickiness/damage of the tagsCheck it up with dataVisual Inspection2.4 Package Check it up with orderVisual Inspection3Ontology3.1color/appearance/cleanlinessVisual InspectionVisual Inspection3.2 Seize of the lampCheck it up with BOMCalipers二、TestNo.Inspection ItemsInspection Method StandardActual ParameterTest equipmentDefectResults RemarkNGOKUnacceptable4Aging TestUnder the punch of aging machine ﹥4HAging Machine5Puncture TestUnder the punch of aging machine﹥4HAging Machine6PowerThe use of power meter+—1WPower Meter6Color TemperatureThe same as customer’s requirementIntegrating Sphere7CRIThe same as customer’s requirementIntegrating Sphere8AngleThe same as customer’s requirement Integrating SphereInspector：出货检验报告检验日期：客户名称定单号产品名称产品规格生产总数结论：□NG □OKInspection Standard抽样检验指导书质量要求：致命瑕疵（CR:0) 严重瑕疵（MA:0.4）轻微瑕疵（MI:1.0）一、外观尺寸检验序号部位检验内容检查方法检验设备缺点别检验结果说明NGOK不接受1外箱1.1外箱表面破损、脏污目测目测1.2外箱的长*宽*高与BOM表核对卷尺1.3贴纸内容、粘性、破损与数据检验目测2内盒2.1内盒表面破损，脏污目测目测2.2内盒的长*宽*高与BOM表核对卷尺2.3贴纸内容、粘性、破损与数据检验目测2.4内盒包装物与定单核对目测3本体3.1颜色、外观、洁净度目测目测3.2整灯的尺寸与BOM表核对卡尺二、测试检验序号检验内容检查方法及标准实际参数检验设备缺点别检验结果说明NGOK不接受4老化测试使用老化机冲压状态下﹥4H老化机5耐压测试使用老化机脉压冲击状态下﹥4H老化机6功率测试使用功率测试仪+—1W功率测试仪6色温测试积分球测试与客户所须一致积分球7显指测试积分球测试与客户所须一致积分球8角度测试积分球测试与客户所须一致积分球检验员QC：