空心涡轮叶片近净形过程变形分析与控制.pdfVIP

第 31 卷第 14 期 中网电机工辍学报 Vol.31 NO.14 May 15, 2011 2011 1f 5 月 15 日Proc明dings of the CSEE ( 2011 Chin.Soc .for E1ω.Eng. 109 文章编号: 0258翩8013 (2011) 14翩。109翩。4 中团分提号: V261 文献标志码:A 学科分提号: 470.20 空心涡轮叶片近净形过程变形分析与控制 李世峰， 卡昆，董一巍，张定华，杜随更 (现代设计与集成制造技术教育部重点实验室(西北工业大学)，陕西省西安市 710072) Analyzing and Controlling Deformation of Hollow Thrbine Blade in Near Net-shape Process LI Shi也吨， BU Kun , DONG Yiwei , ZHANG Dinghua, DU Suigeng (Key Laboratory ofContemporary Design Integrated Manufacturing (Northwest创咀 Polytechnical University) , Xian 710072 , Shaanxi Province, China) ABSTRACT: According to the low-shape accuracy of hollow 是易断视失效件。其性能水啡，特别是承高温能力， turbine blade , the key techniques for treating measurement data, 是一种型号发动机先进科度的重要标志，在一定意 ali伊ing blade model and coupling deformation were studied in 义上，也是一个国家航空工业水平的显著标志[1] 。 detail , which was based on the deviational ana1ysis by using 由于其内部冷却结构复朵、~动外形和尺寸精度要 optical scanning. Meanwhile, considering the compensational 求较高，且长期服役在强烈热冲击与复杂循环热应 也ctors of volume shrinkage and bending-torsíon deformation, the dísplacement field wasωtablíshed in near net-sha阳 力工况条件下，故空心涡轮叶片结构设计与其制造 process. 11酬， the mo1d cavity was implemented by reverse 技术成为高推重比航空发动机的核心技术。 renewal design process. Research results show that the blade 为了提高性能，当代航吧发动机的涡轮叶片设 dimensional accuracy and dimensional stability can effectívely 计静崩采用由大量自由翩而和复杂内腔组成的薄 control, and the accuracy and reliabi1ity of mold cavity are a1so 揩结构(蠕摩 2-û.5 mm)，致使这类叶片的制造技术 improved. So it ís of v创y important theoretical meaníngs and 难度加大。目前，由于国内研制的空心涡轮叶片尺 engineωing practical values.