640-801考试辅导.ppt

CCNA考试介绍 题型一：单选 题型二：多选 题型三：拖拽 题型三：拖拽 题型四：填空 题型五：实验 题型五：实验 题型五：实验 题型五：实验 题型五：实验 题型五：实验 题型六：测试 题型六：测试 题型七：仿真 题型七：仿真 Q12续 Name: QA E0 : S0 : Name: StudyGuide Name: Examinator E0 : E0 : to be determined S0 : 9 S1 : to be determined S1 : Secret Password: testking Task: To configure the router click on the host icon that is connected to the router by a serial cable. Answer: Examinator#config t Enter configuration commands, one per line. End with END. Examinator(config)#int e 0 Examinator(config-if)#ip add 3 24 Examinator(config-if)#no shut Examinator(config-if)#exit Examinator(config)#int s 1 Examinator(config-if)#ip add 5 24 Examinator(config-if)#no shut Examinator(config-if)#CTRL+Z Examinator#copy ru st Q13 Your goal is to restrict all Access to your router except for Telnet. To make this happen, move the commands on the left side to corresponding functions on the right side using the diagram below for reference. Note that not Every option will be used Answer Q14 An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches? (Choose three) A. The switch that will share its VLAN configuration must be in VTP server mode. B. The switches must be in the same VTP domain. C. The switch that will share the VLAN information must be configured as the root bridge. D. The switches must be connected over VLAN trunks. E. The switches must be configured to use the same STP version. F. The switches must have VTP pruning activated. Answer: A, B, D Q15 It is found that some of the users on the LAN cannot reach the Internet. Other users are not having any problems. Based on the topology and router output shown, which of the following commands should be issued on the router to correc