表面处理要求.pdf

Specification 2008-02 Class: Surface protection Class No.:50  Treatment of metallic surfaces of aluminium alloys by anodic oxidation JED 007 Previous Edition Part name (for databases) 2000-09 Anodic oxidation 852 000 070 4 Replacement for JED-007 P 1 Scope The specification refers to the anodic oxidation of aluminium for prevention of corrosion and abrasion and for the purpose of decoration. There are the following types: JED-007-1 for coatings on wrought alloys with low content of copper and lead; JED-007-2 for coatings on wrought alloys with increased content of copper or lead; JED-007-3 for coatings on casting alloys with medium copper content; JED-007-4 for coatings on casting alloys with high copper content; JED-007-5 for coatings of high thickness and very high abrasion resistance on wrought alloys with low content of copper and lead; JED-007-6 for coatings for decorative purposes on wrought alloys with low content of copper and lead; JED-007-7 for coatings of very high abrasion resistance on wrought alloys with low content of copper and lead. If the old specifications JED-007P, or JED-007 without defining the type, are quoted in a drawing the coating must confirm to the requirements of that type of JED-007-1 to JED-007-4 for which the alloy of the part to be coated is within the limits of allo