canon ef50mm拆解.pdfVIP

How to Disassemble the Canon EF 50mm f/1.8 II Lens Yosuke Bando Preface • This instruction is intended to be helpful to those who are going to make some modifications to the camera lens to explore/reproduce coded aperture, color-filtered aperture, and other related techniques for research purposes. • But we disclaim any responsibilities for the consequences of your following this instruction, so do it at your own risk! – For example, • The lens may get broken • Some parts of the lens may be lost • You may not be able to reassemble the lens • The reassembled lens may not work • You may get hurt Why Canon EF 50mm f/1.8 II? • Cheap compared to other camera lenses – Wouldn’t be a big blow even if you broke it by mistake • Easy to disassemble – Simple structure with a small number of parts – Made of plastic, not metal Preparation • Sufficiently large working space – Make an open space on your desk – Do not work in a clutter • Time – A few hours should be sufficient • Tools – Cross slot (‘+’) micro-screwdriver – Flat metallic bar • Straight slot (‘–’) screwdriver can be used • Container for detached parts – Small screws can be easily lost • Cloth for wiping the lens glass Start Disassembly • Remove the back cover Remove the Screws • Two micro-screws can be found • Remove them Remove the Inner Cover 1/2 • Push down the metallic terminal part and drop it into the inside – You can make a room for it by moving the inner tube downward Remove the Inner Cover 2/2 • Insert a bar into where the terminal