Z449AE - Application for Approval in accordance with the Rules….doc

Application for Approvalin Accordance withthe Rules for Welding Page 1 of 2 We, Company: Address: hereby make application for approval by Germanischer Lloyd for the welding shop for the welding consumables and auxiliary materials for the welding shop named in the attached description or the products specified in the Annexes, as applicable. The applicant accepts the following conditions: The Rules for Classification and Construction (particularly, in this instance, the Rules for Welding) issued by Germanischer Lloyd (The Society) in the version applicable at the time application is made. The applicant will ensure that all the information required for the approval, and specified in the rules is provided and documents, test results etc. are submitted as applicable and that access to all the relevant workshops and production areas is at all times allowed to the Societys Surveyor to enable him to carry out his inspection functions. In the absence of any written arrangements to the contrary, fees will be calculated based on the Societys rate of charges at the time approval is granted. Fees are payable even if approval fails to be granted due to unsatisfactory test results. Any withdrawal of this application for approval requires notice in writing and will be subject to a charge in line with the scope of services provided at the time of notification of withdrawal. The documents marked with a cross in the attached list (Annex to the Application for Welding Approval) are enclosed with the application for approval of the welding shop. The documents marked with a cross in the attached list (Annex to the Application for Welding Approval) are enclosed with the application for approval of the welding consumables and auxiliary materials. Place / Date Stamp Signature of Applicant  Annex to the Application for Welding Approval Page 2 of 2 List of documents to be submitted or enclosed with the application for approval Welding Shop Approval / Welding Proced