基于ProE直齿轮参数化建模.pdf

Dynamical Systems and Control 动力系统与控制, 2017, 6(1), 1-9 Published Online January 2017 in Hans. /journal/dsc /10.12677/dsc.2017.61001 Parameterized Modeling of Spur Gears Based on Pro/E 1 2 2 Hongbo Zhao , Rui Teng , Renjin Feng 1 Sheng Da Dalian Construction Engineering Co., Ltd., Dalian Liaoning 2 Liaoning Technical University Mechanical Engineering Institute, Fuxin Liaoning th th th Received: Nov. 15 , 2016; accepted: Dec. 16 , 2016; published: Dec. 19 , 2016 Copyright © 2017 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract In order to solve the problems that traditional design method of spur gears are complicated, long period, and low working efficiency, we can apply Pro/E soft to initialize parameters of spur gears, create four fundamental circles, generate involute, contour gear and chamfer, create image of in- volute, cut gear groove, copy character of gear groove, create tooth profile, create shaft hole and keyway etc. 3D parametric design of spur gears can realize through a series of those steps. We do parametric drive test, and also draw the 3D models of spur gears according to the different para- meters. Keywords 3D, Involute Curve, Parametric, Modeling 基于Pro/E的直齿轮的参数化建模 1 2 2 赵洪波 ，腾 睿 ，冯认金 1大连晟达建筑工程有限公司，辽宁 大连 2辽宁工程技术大学机械工程学院，辽宁 阜新 收稿日期：2016年11月15 日；录用日期：2016年12月16 日；发布日期：2016年12月19 日 文章引用: 赵洪波, 腾睿, 冯认金. 基于Pro/E 的直齿轮的参数化建模[J]. 动力系统与控制, 2017, 6(1): 1-9. /10.12677/dsc.2017.61001 赵洪波 等 摘 要 为解